Historical Station Pictures
If your have any historical data or pictures please contact webmaster@wcti12.com

Commercial
Picture
Cameraman Ted Carey- (pulling out chair)
Producer/Director Bill McLean (standing behind table)
Artist Janet Lathem (standing by chair)
Hostess Jo Ann Frank (seated)

Programming
Trade Show/Conference
Jo Ann Frank (right)
Adam West 'Batman' (middle)
Unknown friend (left)

Promotional
Photo
Miss Jo Ann Frank

Programming
Trade Show/Conference
Bruce Lee (left)
Jo Ann Frank (middle)
Van Williams (right)

Original
Front Lobby
1963

Studio
Publicity Shot
Max Powell (left camera)
Jo Ann Frank (set)
Nathan Frank (right camera)

Front
Lobby (looking out)
(left to right)
Jo Ann Frank
Janet Lathem
Ted Carey
Jim Putnum - Promotion
Tilly Knowles - Commercial
Clyde Register - Programming
Unknown Military Officer

Outside
Station
diamond reads: "The best of Everything in Sight"
Jack Edwards - Production Mgr. (left)
Jo Ann Frank (middle)
Ted Carey (right)

Romper
Room
Patsy Bevels (left)
Jo Ann Frank (right)

Plans
for Craven Regional Library
Jo Ann Frank (left)
Elinor Hawkins (middle)
John Peterson (Architect) (right)

Telestory
Time (1968)
Cameraman Ted Carey
Miss Elenor Hawkins (seated)

The
Greatest Cameraman
Ted Carey
Mr. Carey retired after 38 years of service with
WCTI/WNBE in March of
2002.

Film
Viewing Room (1963)
Bill McLean - Production Manager

Film
Viewing Room (1963)
Janet Lathem - Graphic Artist

March
of Dimes (late 70's)
Bill Jenkins - General Manager on Microphone.

Original
Control Room (1963)
Unknown persons.

Station
engineers (1963)
Dallas Cox - Chief Engineer on mic.
Unknown assistant.

Weather
Breaks
Raymond Horn - Operations Manager.
The following pictures are from
our 2000 foot transmitter being constructed in Trenton in 1981.
Thanks to Angelo "Butch" Figurella who was the Chief
Engineer here from 1976-1982.

This is the main concrete pad that the transmitter tower sits on... it
is about 36 feet deep and 8 feet in diameter

The rebar tube for the transmitter pad is now (36 feet deep) is inserted
into the ground and filled with concrete.

Here you can see the bottom end of the tower... (the tower sits on the 3
foot round disc... the wires do most of the work.)

Here they are lifting the bottom end of the tower into place.

The bottom of the tower is bolted onto the concrete pad.

This is the actual Analog transmitter system inside the building.
It was replaced in 2006.

This is a look from the base of one of the wires holding up the tower.
The big metal part at the bottom is a big shock absorber... yes the
tower does sway a bit.

This is the transmitter building being constructed.
|